Mistakes to Avoid When Using a Magnetic Drill

Drilling can be faster and more accurate with a magnetic drill press. Yet, there are also common errors people commit in using this tool that can cause accidents or mishaps. What You Shouldn’t Do When Using a Magnetic Drill? There are things you should avoid doing when using a magnetic drill for your own safety and optimal results. As a professional manufacturer, EKIIV is here to give you some methods for avoiding these mistakes and using your magnetic drill cutter correctly. 

Key Mistakes of the Users with a Magnetic Drill

One of the most frequent errors made is not clamping or securing the material enough. If what you are drilling is not snugly secured to your work surface, when you push down on the drill bit can move and snap the bit itself or produce a wonky hole. Be sure to clamp or magnet down the material before you begin drilling. 

The third thing that can ruin your hole is incorrect speed and pressure while drilling. Various materials require different speeds and pressure to drill effectively. Incorrect settings can cause your drill bit to overheat, wear down or break. Please refer to the manufacturer for the recommended speed and pressure settings of the material you are cutting. 

One other common mistake is drilling without coolant. The coolant serves to lubricate the drill bit and reduce friction, as well as cool the piece which is being drilled. You will need to use lubricant as not doing so, you can expect the drill bit to become dull, break or leave rough edges around the hole. Be certain to use the correct coolant for the material that you are drilling and also maintain sufficient flow while drilling. 

Don’ts When Working with a Magnetic Drill

It is crucial not to put strain on the bit when using a magnetic drill. Don't push or force it, make sure the drill bit is doing the work. If the drill is pressed, it will bend and crush, causing a hole to be of poor quality and over time will cause injury. 

A damaged or very dull drill bit can also be blamed. Check the bit before you use it to ensure that it is in good condition. A worn or damaged drill bit can create a poor hole, cause chipping, and may damage the item being drilled. Install a new bit if the bit is worn or damaged. 

Finally, don’t forget to mark out where you are going to drill before getting started. Drilling a guideline at the location where you'll want to drill another hole is also great for accuracy. Failing to do this can result in misaligned holes, materials that are wasted and more work. Don't forget to mark your hole. 

However, by steering clear of these mishaps and taking the advice from EKIIV on board you will be able to operate your mag drill safely and efficiently. Remember always to secure the material, use proper cutting speed and feed and coolant, don’t force the drill bit, utilize high-quality drill bits, and mark the drilling point. By following these easy steps, you’ll be able to optimise your magnetic drill machine and produce professional results without difficulty. 

Wholesale buyers need to avoid some errors when operating a magnetic drill that compromise safety and productivity. Here are some crucial tips: 

Top 5 Tips for Buyers of Wholesale Magnetic Drills:

Read the manual: It is imperative to first read the manual before you use a magnetic drill. The manual will contain everything you need to know about how to properly use the drill, including any necessary safety precautions. 

Check power supply: Please ensure that the mag drill is connected to a power current before use. If you don’t, it can either ruin the drill or cause injury to yourself. 

Use appropriate accessories: For using a magnetic drill, it is imperative that you use the right kind of accessories like cutting tools and drill bits. The use of incorrect accessories may cause poor performance and possible damage to drill. 

EXAMINE WORK AREA: Before using a magnetic drill, check the work area for any objects or hazards. This will prevent accidental occurrence and make drilling faster. 

Wear the right safety gear: To safeguard yourself from any possible hazards while using a compact magnetic drill, you should wear appropriate safety gear including goggles and gloves. 

Magnetic Drills Dos and Don'ts:

Dos:

Please adhere to the manufacturer's instructions for use of your magnetic drilling machine. 

Good - keep the drill clean and well oiled to get best result. 

Use the drill on flat, firm ground to avoid untoward incidents. 

Don'ts:

The magnetic drill must not be used in water or other liquids. 

Avoid making the drill do extra work when cutting through material it wasn't made for. 

Never leave the drill running unattended. 

What Wholesale Buyers Will Want to Know:

Identify the needs for care of your magnetic drill press Wholesaling customers of a magnetic drill should pay attention to ongoing maintenance and care for their devices. You can prolong the life of your drill and maintain maximum performance by frequently checking for signs of wear, making sure that it’s kept clean and a little oiled. Furthermore, wholesale purchasers also have a need for the finest magnetic drill accessories and replacement parts needed to help their machines running in peak condition. Wholesale buyers who want to get the most out of their investment in a magnetic drill will appreciate these tips and guidelines on how to use them properly.